Poor material flow can cause material build-up, halting your production. With the ease of maintenance in mind, Benetech has engineered the Clean Sweep AC to increase material flow with a clean sweep of air, to free blocked or plugged chutes, silos, bins, and hoppers. In 0.1 sec, the Clean Sweep AC delivers a 3ft radial pulse of air along the chute wall, 360 degrees, to return material in its free-flowing state. Clean Sweep AC requires 80 – 100 psi of compressed air and operates on 120 VAC single-phase power. Most bulk material handlers would agree that a perfect day at the plant would include an uninterrupted material flow: no shutdowns, little to no maintenance, nothing but steady production from sun up to sundown. Clean Sweep eliminates bridging, ratholes, and material handling build-up. Each nozzle emits a high-pressure, high-volume, 360-degree burst of compressed air to lift and sweep stalled material back into the flow stream – clearing the way for higher factory and material handling efficiency.
Distinctly designed for bulk materials, the radial Clean Sweep automatic cleaning system uses standard plant compressed air at 80–100 PSIG to prevent pluggage and eliminate build-up in transfer chutes, bins, hoppers, silos, and bunkers.
Easy to install and maintain, Clean Sweep Air Cannon is your trouble-free answer to ensuring uninterrupted material flow, especially for wet and sticky substances such as sand and cement. Clean Sweep is the only radial, pneumatic air cannon cleaning system created for bulk material handling and designed not to damage ceramic-lined chutes to keep material flowing.